A polymer-based release agent which has high heat stability. It’s polymers provide multiple releases and protection from high heat generated from accelerated exothermic reactions.It is specially designed for:

一種具有高熱穩定性的聚合物脫模劑。它含有的聚合物能多次優質脫模，和保護模具免受固化反應時高溫放熱產生的傷害。該產品特別適合于：
Accelerated Exothermic Resins up to 400º F or 204º C

高達400ºF或204ºC的加速放熱樹脂。
Multiple Releases

多次脫模。
Compression Molding

模壓成型脫模。
Vacuum Bagging

真空成型脫模。
Resin Transfer Molding (RTM)

RTM成型脫模。

NOTE: For best results, use terry cloth or Turkish towels when applying #135T. Apply in a circular motion to mold by overlapping previous area. Work product in thoroughly over the mold creating a thin even coat. Check for uniform coverage. Allow it to dry. Reapply as directed. 

注意：為了獲得最佳效果，使用毛巾或棉布浸潤＃135T脫模劑。以圓周運動方式擦拭在模具上，并在同一區域多次擦拭。徹底在模具上形成一層薄的均勻的保護層。檢查是否已均勻覆蓋整個模具。再讓它揮發干燥。并按此指示重新多次實施。

      #135T may be sprayed. When applying, if sprayed, we suggest wiping it lightly over sprayed film for uniform coverage.

＃135T脫模劑可噴涂在模具表面。如果采用噴涂方式，應在噴涂后輕輕擦拭，以均勻覆蓋整個模具。

樂泰產品漢高Frekote 770-NC 是低氣味，快速揮發的Frekote 700-NC。Frekote 770-NC 提供優良的脫離，而且可以直接替代Frekote 700-NC。Frekote 770-NC 可用于離型以下材料：環氧樹脂（熱固化樹脂,復合纖維材料）聚酯材料與熱塑性塑料。

特性 ：表面光滑，易離型；適用廣—適用大多數聚酯材料；室溫干燥固化；無轉移；無殘留；低氣味